Loading...
Loading...
Advanced Journal of Science, Technology and Engineering
Vol. 3Issue 12023pp. 63–74Published 4 September 2023
DOI 10.52589/AJSTE-AEQAKVWAShare Link
Cite this
Citation unavailable for this article.
Abstract:
Hydrogeophysics is the investigation of underground formations to understand the hydrologic cycle using geophysical techniques, which aids to understand the groundwater quality and type of aquifer. One of the surface geophysical methods is the Vertical Electrical Sounding; it is effective in the investigation of layer resistivity and thicknesses of layers at various depths of interest as well as aquifer thickness. Twenty (20) VES points were sounded with maximum spread AB/2 of 60 m. The VES data was processed using IPI2 win and sounding curves obtained at most combinations which include HA, QH, KHK, KHA, A and H. The sounding curves were observed to have five layers at most: the first layer resistivity and thickness ranges (53.1–606 Ωm, 0.545–6.24 m) followed by the second layer ranging (7.7–730 Ωm, 2.17–20.4 m) and the third layer act in most of the VES as the aquiferous zone which ranges from (19–160000 Ωm, 17.2–20.1 m); jiggling was also observed within the fractured-fresh crystalline basement which represents fractures. The recommended depth of drilling ranges from 50–60 m over granite/bauchite where extensive weathering and fracturing is observed and over migmatite and gneiss 70–80 m as only fracturing was observed at deeper depth. The yield anticipated in the recommendation is moderate-high with a very low or low yield from the non-recommended VES.
Disclaimer/Publisher’s Note
The statements, opinions and data contained in this publication are solely those of the author(s) and contributor(s) and not of AB Journals or its editors. AB Journals remains neutral and accepts no responsibility for any injury or damage resulting from ideas, methods, instructions or products referred to in the content.
Copyrights