Design Efficiency and Optimal Values of Replicated Central Composite Designs with Full Factorial Portions

Publication Date: 28/10/2021

DOI: 10.52589/AJMSS-AJWDYP0V


Author(s): Iwundu M.P., Oko E.T..

Volume/Issue: Volume 4 , Issue 3 (2021)



Abstract:

Efficiency and optimal properties of four varieties of Central Composite Design, namely, SCCD, RCCD, OCCD and FCCD and having r_f replicates of the full factorial portion, r_α replicates of the axial portion and r_c replicates of the center portion are studied in four to six design variables. Optimal combination,[r_f: r_α: r_c ] of design points associated with the three portions of each central composite design is presented. For SCCD, the optimal combinations resulting in A- and D- efficient designs generally put emphasis on replicating the center portion of the SCCD. However, replicating the center and axial portions allows for G-optimal and efficient designs. For RCCD, the optimal combinations resulting in A- and D- efficient designs generally put emphasis on replicating the factorial and center portions of the RCCD. However, replicating the center and axial portions allows for G-optimal and efficient designs. For OCCD, the optimal combinations resulting in A- optimal and efficient designs generally put emphasis on replicating the axial and center portion of the OCCD. The optimal combinations resulting in G- optimal and efficient designs generally put emphasis on replicating the factorial and axial portions of the OCCD. To achieve designs that are D-optimal and D-efficient, the optimal combination of design points generally put emphasis on replicating the center portion of the OCCD. For FCCD, the optimal combinations of design points resulting in A-efficient designs put emphasis on replicating the axial portion of the FCCD. The optimal combinations resulting in G- optimal and efficient designs as well as G-optimal and efficient designs generally put emphasis on replicating the factorial and axial portions of the FCCD. It is interesting to note that for FCCD in five design variables, any r^th complete replicate of the distinct design points of the combination [r_f: r_α: r_c ] resulted in a D-efficient design. Many super-efficient designs having efficiency values greater than 1.0 emerged under the D-criterion. Unfortunately, these designs did not perform very well under A- and G-criteria, having some efficiency values much below 0.5 or just about 0.6.


Keywords:

SCCD, RCCD, OCCD, FCCD, Optimal Values, Design Efficiency


No. of Downloads: 0

View: 512




This article is published under the terms of the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International (CC BY-NC-ND 4.0)
CC BY-NC-ND 4.0